vacuum pump and vacuum system manufacturers directory for Alaska, California, Hawaii, Oregon and Washington

Vacuum pumps and components in the states of Alaska, California, Hawaii, Oregon and Washington

USA entry page or select a Zip Code: ZIP 0 ZIP 1 ZIP 2 ZIP 3 ZIP 4 ZIP 5 ZIP 6 ZIP 7 ZIP 8 ZIP 9 or an area code

VACC, LLC - www.vacclimited.com
- 3748 Via Baldona, Oceanside CA 92056, USA

Peter LUKENS, email: info@vacclimited.com, Tel. +1 650-906-4912

VACC Limited is a full service engineering and consulting firm specializing in the design and development of state of the art vacuum and cryogenic hardware and processes for the world-wide technology market.
Expert design assistance and state of the art vacuum system modeling is also available in collaboration with your product development team.

products: Turn-key Rough, High and UHV vacuum systems

RGA based vacuum bake stations
Diverse leak detection solutions
Closed cycle cryostats and cryogenic systems

VECOR coating and vacuum equipment and components

VECOR - www.vecorus.com
- 101 Duranzo Aisle, Irvine CA 92606, USA

Vladimir CHUTKO, email: info@vecorus.com, Tel. +1 949-394-4466

products: coating and vacuum equipment and components

coating machines, DC magnetron sputtering systems, ion sources, power supplies, controllers, etc.
vacuum engineering software, optical components, and also provides high quality consulting, engineering and equipment upgrade service.

THERMAL CONDUCTIVE BONDING, INC. - www.tcbonding.com
- 1430 Tully Road, 95122 San Jose, USA

Jacques MATTEAU, email: jmatteau@tcbonding.com, Tel. 408-920-0255

Thermal Conductive Bonding, Inc.: Since 1998 TCB has offered high quality bonding services for the high technology communities. Having successfully developed proprietary bonding techniques that uniquely address issues relating to assemblies such as sputtering targets, Electrostatic Chucks, and Gas Dispenser Plates, TCB has had a focus on the thin film and semiconductor community. With many decades of solid experience in joining materials TCB continues to explorer diverse applications that would have us expand on where our techniques and bonding materials can be used.

products: Precision Bonding Services

Indium Bonding, Elastomer Bonding, Custom Sputter Coating

Trillium SubFab Services - www.trilliumsubfab.com
- 13011 SE Jennifer Street STE 204, Clackamas, OR 97015, USA

Rob Breisch, Vice President, Business Development
email: robertb@trilliumsubfab.com
Tel. +1 503-682-3837, direct 801-416-0827, mobile 801-726-5035

Trillium SubFab Services, Inc. was established in 2002 in Wilsonville, Oregon. We recently moved to our new 31,000 square foot World Class facility in Clackamas, Oregon.

products: Semiconductor Vacuum Pump and Peripherals Service & Repair

Customized On-Site Service Contracts
Refurbishment / Exchange Services
Semiconductor Vacuum Systems

Expertise in multiple makes/models of dry pumps, boosters, wet pumps, chillers, and abatement equipment
Turn times of 15 days or less - Free local pickup and delivery in the Portland, OR area - Largest inventory of exchange pumps in the US
Customized service and support programs based upon customer needs

Vacuum Atmospheres Co. - www.vac-atm.com
- West Rosecrans Ave., Hawthorne CA 90250-6896, USA

email, Tel. +1 310.644.0255

Vacuum Atmosphere Company is a leading Glovebox manufacturer. We have supplied inert atmosphere gloveboxes and inert gas purification systems worldwide since 1960.

products: vacuum gloveboxes

MVP Vacuum - www.mvpvacuum.com
- 16027 Valley View Ave. , Santa Fe Springs, CA 90670, USA

email, Tel. +1 562.802.0025

MVP Vacuum, Inc. was established in 1989 with the vision of giving our customers quality products and services at a reasonable price, and to do this with honesty and integrity. MVP Vacuum is a Christian owned and operated business.

products:

We carry a wide range of reconditioned equipment from most makes and models of vacuum pumps and systems, leak detectors, and Blowers.
MVP Vacuum provides repair and overhaul services for a wide variety of mechanical vacuum pumps and boosters. All pumps are rebuilt at our Southern California location and each leaves with a one year limited warranty on parts & labor.

Quality Vessel Engineering - www.qvessel.com
- 12201 Slauson Avenue, Santa Fe Springs, CA 90670, USA

Tommy Anderson, email, Tel. +1 949-939-5972

49 employees ASME shop and field certified. Specializing in Stainless Steel Custom one of a kind fabrication projects.

products: Custom Vacuum Chambers, large and small

Brenner-Fiedler & Associates, Inc. - www.brenner-fiedler.com
- 13824 Bentley Pl., Cerritos, CA 90703, USA

James Kloman, President, Tel. (800) 280-1629

products:

- Gast - Rotary Vane, Linear, Diaphragm, Piston, Vacuum Generator
- Busch - Mobile Vacuum System
- Leybold - High Vacuum Pump, Rotary vane vacuum pumps
- Lyco - Liquid Ring
- Airtech - Vacuum Pumps

BUSCH, Inc. - www.buschpump.com
- 13826 Struikman Road, Cerritos, CA 90703, USA

email, Service Tel. 1-800-USA-PUMP
Steve Stutzel, Regional Manager (S.CA,AZ,S.NV,CO,N.NM,UT), Tel. +1 562-926-8422

Since the foundation of BUSCH in 1963 in Germany, the company policy has always been customer oriented, supplying high quality and competitively priced products, as well as excellent technical support and service backup. BUSCH now has five manufacturing plants and a total of 33 BUSCH companies serving customers throughout the world. The BUSCH manufacturing facilities are certified to ISO 9001

products: Vacuum Technology, Vacuum Pumps & Systems

- Oil Recirculating rotary vane vacuum pumps (R5 series up to 1600 m³/h),
- screw vacuum pumps (COBRA up to 2700 m³/h),
- rotary piston vacuum pumps and compressors (Mink up to 500m³/h),
- Once-Through-Sealing rotary vane vacuum pumps(Huckepack bis 760 m3/h),
- dry vacuum pumps (Seco bis 250 m³/h),
- side channel blowers (Gazelle, Samos up to 1100 m³/h),
- liquid ring vacuum pump (Dolphin up to 435 ³/h),
- Scroll vacuum pumps (Fossa up to 30 m³/h),
- Roots blowers (Puma / Panda up to 8000m³/h, - Dingo/Cat/Panther up to 3120 m3/h),
- Turbomolecular vacuum pumps,
- Service and Repair
- accessories

Helium Leak Testing, Inc. (HLT) - www.heliumleaktesting.com
- 19348 Londelius Street, Northridge CA 91324, USA

email, Tel. 800.423.1701

Helium Leak Testing, Inc. (HLT) is committed to advancements in technology for mass spectrometer leak detection, vacuum gauge and helium leak calibrations, vacuum equipment, maintenance and repair support.

products: Helium Mass Spectrometer Leak Detection

In House Leak Testing, Leak Standard Calibration, Automated Vacuum Pumping Systems, Environmental Vacuum Capability, Preventive Maintenance Services, Field Leak Testing, Vacuum Gauge Calibration, Leak Detector Service and Repair, Vacuum Pump Service and Repair, Automated Leak Detection Systems.

THERMOMETRICS CORPORATION - www.thermometricscorp.com
- 18714 Parthenia Street, St. Northridge 91324, USA

Dan DOBBS, email, Tel. +1 818-886-3755

products: electrical feedthrough assemblies for high vacuum applications

Thermometrics manufactures feed through assemblies and instrument cables in a variety of configurations including coaxial, multi-conductor, and thermal couple wires. Terminations consists of thermocouple or BNC connectors, and several other miscellaneous connector devices.

Accu-Glass Products, Inc. - www.accuglassproducts.com
- 700 Arroyo Ave., San Fernando, CA 91340, USA

email, Tel. +1 (818) 365-4215

products: In-Vacuum Viewports

for High and Ultra High vacuum systems.

MediVac Technologies - www.medivactech.com
- 25030 W. Avenue Stanford #190, Valencia, CA 91355, USA

email, Toll Free (800) 479-3349

MediVac was formed in the late 1990's to meet the demand of many industries for solutions to difficult leak detection problems. The growing use of high vacuum equipment in today's manufacturing and industrial processes has created a genuine need for fast, reliable service. From massive steam turbines and condensers to miniature hermetic enclosures our staff is dedicated to outperform any competitor in quality, dependability and cost.

products: Helium Leak Testing Service

for Steam Condensers, Generators, Buried Pipelines, Heat Exchangers, Tank Floors

Leak Detector Sales, Leak Detector Repair, Leak Test Automation, Vacuum Systems, Vacuum Pump Oil, Cryopumps

OES INC - www.motioncontrolplanet.com
- 6901 Woodley Avenue, CA 91406 Van Nuys, USA

email, Tel. Free 888-777-1826

Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products. The company's product line includes motion control systems, drive electronics, modules and controller cards. OES also supplies high-torque rotary stepper motors, voice coil motors, servo motors, three phase brushless motor and positioning stages and slides. All products are available for immediate worldwide shipment.
Established in 1985, Optimal Engineering Systems, Inc. is headquartered in Los Angeles, California, USA. The proximity of Optimal Engineering Systems, Inc. to both the major airport and seaport facilities of Southern California makes service to international customers very expedient without any freight forwarding or time consuming difficulties.

products: Actuators and Stages:

Linear Stages, Linear Actuators, XY Stages, XYZ Stages, Rotary Stage, Rotary Actuator
Motion Controllers, Motors, Solenoid Control Electronics, Power Supplies

Leonard Engineered Products Co. - www.leonard-eng.com
- 11354 Burbank Blvd., North Hollywood, CA 91601, USA

email, Tel. +1 (818) 760-4100

products:

SIHI Liquid Ring Vacuum Pumps and Compressors,
Dry Vacuum Pumps,
Packaged Vacuum Systems,
Digester Gas and STERLING-GARO Compressors.

PTB Sales, Inc. - www.ptb-sales.com
- 1331 Mountain View Circle, CA 91702 Azusa, USA

Jon MCDONALD, email, Tel. +1 626-334-0500

products:

Used equipment dealer and rebuilder of vacuum deposition equipment, large inventory of pumps, lab equipment, water chillers, vacuum chambers and furnace, controllers, blowers, evaporators, cathodes, gauges, Leak Detectors, semiconductors, valves

Associated Vacuum Technology Inc. - www.avtvac.com
- 832 North Grand Avenue, Covina, CA 91724, USA

email, Tel. +1 (626) 967-3869

Associated Vacuum Technology has been in business for over 20 years serving our customers with Sales & Service for their vacuum requirements.

products:

New products, rebuilt equipment and custom vacuum systems, from customized vacuum shelf dryers to vacuum ovens along with vacuum pumps and accessory items such as fluids, gauges, repair kits etc.

LANS COMPANY, INC. - www.lanscompany.com
- 428 W. Carter Drive, 91740 Glendora, CA, USA

Shannon Silverman, email, Tel. 888-596-5267

Celebrating 50 years in business, LANS Company is a Southern California distributor and service center for complete air systems including vacuum pumps, air compressors, dryers and filters.

products: Service center for all major brands

Becker vacuum pumps

Liquid Vacuum - www.liquidvacuum.com
- 1405 S. Gage Street, San Bernardino, CA 92408-2835, USA

Don Green, email, Tel. +1 (909) 799-7479

Liquid Vacuum was established in 1992 when Donald L. Green, with 18 years experience, left his position as Regional Service Manager of Nash Engineering Company to start his own business specializing in the repair of liquid ring vacuum pumps of various makes and models
In 1994 we leased our own building in Corona and by September 2000 we purchased an industrial building in San Bernardino, Ca.

products:

- Pumps & Parts for liquid ring vacuum pumps: Armstrong by INOX, Nash/Elmo, Sihi, Vooner
- Rebuilt Equipment: Vacuum pumps, compressors, and motors
- Field Options: Performance testing - Fiberscoping - Bearing testing, Preventative maintenance, removing and installing equipment, Troubleshooting at your location or over the phone, Pick-up and delivery of local equipment under 5000lbs.

Graham Corporation (California sales office) - www.graham-mfg.com
- 1682 Langley Avenue, Irvine, CA 92614, USA

Daniel Marlin, email, Tel. +1 (949) 250 4449

products:

Vacuum Ejectors, single or multiple stage Ejector systems provided as components only or complete packages
Process Condensers, Liquid Ring Vacuum Pumps, Dry Vacuum Pumps.

Para Tech Coating, Inc. - www.parylene.com
- 35 Argonaut, Aliso Viejo, CA 92656, USA

email, Tel. (800) 999-4942

Para Tech Coating has been offering Parylene conformal coating products and services to a wide range of customers since 1968.

products: coating systems

PTC Parylene coating systems are microprocessor-controlled with user-selectable programs to meet various film thickness and substrate loading requirements. A PC interface makes it possible to prepare, store and load custom deposition parameters to meet virtually every coating requirement.

Stanford Materials Corporation - www.stanfordmaterials.com
- 4 Meadowpoint, Aliso Viejo, CA 92656, USA

email, Tel. +1 (949) 362-1746

Stanford Materials Corporation is a worldwide supplier of various oxides, metals, alloys, advanced ceramic materials, and minerals. It was established in 1994 to supply high quality rare earth products to our customers in the research and development fields. To meet increasing demands for rare earth products and other materials, Stanford Materials now carries a variety of materials to serve not only our customers in research and development but also manufacturers in the ceramic, metallurgy and electronic industries.

products: Evaporation Materials, Sputtering Targets

American Seal & Packing - www.aspseal.com
- 1537 E. McFadden Ave. #A, Santa Ana, CA 92705-4317, USA

email, Tel. +1 714-593-9780

products: Pump packings

Water Service Packings, Flax, Non-asbestos pump packing, Ameri-lon, GFO - GFO
Abrasive resistant pump packings, Chemical resistant pump packings, High temperature pump packings - Graphite, Carbon, & Flexible Graphite.

YARDLEY PUMP AND VACUUM, INC. - www.vacuumcentral.com
- 1701 East Edinger Avenue, Suite E-12, Santa Ana, California 92705, USA

Bruce Blanchart, President, Applications Engineering-Vacuum Products, email, Tel.

application-driven, rotating equipment distributor able to meet all of your vacuum and air handling needs. In addition, we offer a complete line of products for your liquid handling applications.

products:

Medical Air & Vacuum Systems, Hill-Rom, Medeas, Ohmeda Medical Gas Equipment, Puritan Bennett Pipeline Equipment,
Nash Liquid Ring Vacuum Pumps and Compressors.
Rotary Vane Oil-Less Vacuum Pumps and Oil-Less Compressors, with Vacuum and Blast Air from One Pump, with up to Six Pumps in One Package .

PFEIFFER Vacuum Inc. - www.pfeiffer-vacuum.com
- 1622 Garland Avenue, CA 92780 Tustin, USA

Reginald Ullrich, Sales Engineer, email, Tel.

products:
Turbomolecular pump, Rotary vane vacuum pump, Roots pump, Diaphragm pump, Dry pump,
vacuum measurement and control instrument, Mass spectrometer, Residual gas analyzer,
Helium leak detector, vacuum flanges, vacuum fitting, tubing.

A-Vac Industries -
- 1845 S. Lewis St., Anaheim, CA 92805, USA

email, Tel. 800 747-2821

high-vacuum specialist stocking distributor for Alcatel and Welch.

products: All major brands of new and rebuilt pumps

leak detectors, valves, gauges.

Terra Universal, Inc. - www.terrauniversal.com
- 800 S. Raymond Avenue, Fullerton, CA 92831, USA

email, Tel. +1 714-578-6000

products: Vacuum Chambers

Ideal for degassing parts, vacuum encapsulation and general-purpose vacuum experiments
Over a dozen standard sizes and three materials: acrylic, stainless steel and aluminum
Sturdy, pre-tested turnkey systems safely support vacuum level to 29.9" Hg
Complete line of vacuum pumps and controllers

Culver Consulting - www.culverequipment.com
- 5042 7th street, CA 93013 Carpinteria, USA

Christopher Culver, email, Tel. +1 805-684-3974

Consulting, sales and service - Serving the Semiconductor and Optical Coating Industries.

products:

Apollo Enterprises Inc.
- 167 Lambert St., Suite A, Oxnard, CA 93036, USA

Tel. +1 (805) 988-1745

Diaphragm air pumps manufacturer

products: diaphragm air pumps

vacuum to 10 In.Hg., suction capacities to 40 scfm

Hetzel Vacuum Pump Mfg. Inc.
- 2517-T Sycamore Dr., Suite 254, Simi Valley, CA 93065-2303, USA

Tel. +1 (805) 526-8884

products: High Vacuum, Rotary Vane Pumps

Finemech Inc. - www.finemech.com
- 35 Kiowa Court, Portola Valley, CA 94028, USA

Peter Boot, email, Tel. +1 650 851 8029

On-line store provides technical support for full range of vacuum components.
Shipping world-wide factory direct.

products:

Vacuubrand Vacuum Pumps, Thyracont vacuum gauges & controls:
Diaphragm Pumps, Rotary vane pumps, VARIO Speed Controlled pumps, High Vacuum Systems, Roots Pumps.
Capacitive Gauges, Pirani Gauges, Penning Gauges, Vacuum Switches, Vacuum Transducers, KF, ISO-K,ISO-F CF-UHV

Duniway Stockroom Corp. - www.duniway.com
- 1305 Space Park Way w Mountain View, CA 94043, USA

email, Tel. 1-800-446-8811

Huntington Mechanical Laboratories, Inc. (Huntington), was founded in 1969 and soon earned recognition as a leader in the design and manufacture of ultra-high vacuum (UHV) research equipment. Huntington has been supplying quality products to the highly discriminating semiconductor industry and national research laboratories for a quarter of a century.

products:

Ion Pumps, Vacuum gauges, Hardware, Supplies, Mechanical pumps, Diffusion pumps, Leak detectors, Surplus equipment

Huntington Mechanical Laboratories, Inc. -
- 1040 La Avenida, Mountain View, CA 94043-1483, USA

email, Tel. +1 (650) 964-3323

Huntington Mechanical Laboratories, Inc. (Huntington), was founded in 1969 and soon earned recognition as a leader in the design and manufacture of ultra-high vacuum (UHV) research equipment. Huntington has been supplying quality products to the highly discriminating semiconductor industry and national research laboratories for a quarter of a century.

products:

High vacuum components: From Standard Products to Custom Chambers, Made to Order Components, Custom Fabrications, Positioners, Manipulators, Stages and Feedthroughs, Valves, Flanges, Fittings and Connection Hardware, Traps, Roughing Components and Accessories, Total Technical Support, Fully Integrated Manufacturing Facility

Lassen High Vacuum Inc. -
- 265 Polaris Ave, Mountain View, CA 94043, USA

email, Tel. +1 650-961-5551

Lassen High Vacuum Inc. is a full service center providing sales and service for refurbished cryogenic vacuum pumps and compressors.
Our service center provides fast turn around and quality workmanship.
We have a large inventory of refurbished cryogenic pumps and helium compressors.

products:

TeleChem International, Inc. - www.arrayit.com
- 524 East Weddell Drive, Sunnyvale, CA 94089, USA

email, Tel. +1 (408) 744-1331

products: Linear Pump

TeleChem's ArrayIt® brand vacuum pumps (Cat. AVP and AVP220) set a new standard for oil-free laboratory vacuum pumps. Our AVP products are extremely quiet, rugged and durable, and can be used for the full spectrum of microarray laboratory applications including solution filtration, vacuum stations in microarray robots, vacuum manifolds for DNA purification, cleanroom, and many other laboratory applications.

Varian, Inc. Corporate Headquarters - www.varianinc.com
- 3120 Hansen Way, Palo Alto, CA 94304-1030, USA

email, Tel. +1.650.213.8000

Varian Vacuum Technologies' product lines include primary and high-vacuum pumps, ultra-high vacuum pumps, vacuum instrumentation and accessories, and helium mass spectrometer leak detectors. The company's vacuum roots run deep. The ion pump, used for achieving ultra-clean vacuum environments, was invented by Varian Associates, Inc.1 in the 1950s � initially for evacuating its own high-frequency microwave tubes.

products:

- Primary Pumps: Rotary Vane Pumps, Dry Scroll Pumps
- High-Vacuum Pumps: Diffusion Pumps, Turbomolecular Pumps
- Ultra-High Vacuum Pumps: Ion Pumps
- Leak Detection: Helium Mass Spectrometer, Leak Detectors, Portable Helium Leak Detectors
- Vacuum Measurement: Transducers, Gauge Controllers, Active Gauges
- Vacuum Valves: Rough, High, and Ultra-High Vacuum Valves
- Vacuum Components: Flanges and Fittings

Cal West-Mashy Co. - www.calwestmashy.com
- P.O. Box 6713, Concord, CA 94524, USA

David Mashy, email, Tel. +1 (925) 682-5100

Artisan Industries sales representative for California (northern), Nevada (western)

products: Vacuum Ejectors

PFEIFFER Vacuum Inc. - www.pfeiffer-vacuum.com
- 1648 St. David Drive, CA 94526 Danville, USA

Toll Free Number: (800) 248-8254
Mike Huggins, Sales Engineer, Tel. +1 925 785 9550

APPLIED CRYOGENICS, INC. - www.appliedcryogenics.com
- 4009B Pestana Place, Fremont, CA 94538, USA

Marc Sanders, President, email, Tel. +1 510 252-9900

Applied Cryogenics, Inc. has been one of the most sought-after supplier of rebuilt cryopump, cryo pumps and similar items for the Vacuum-Deposition and Semiconductor Industries for sputtering, PVD, CVD, Thermal and Evaporation deposition systems.

products: Service and repair of cryogenic vacuum pumps

Applied Cryogenics builds a broad array of cryo pumps and cryopump systems designed to deliver exceptional performance, reliability and productivity.

A Cryopump is a vacuum pump that traps gases and vapors by condensing them on a cold surface.
With years hands-on experience in the art of cryopump service and long-time experience as a supplier to high technology in the semiconductor and aerospace industries.

Kashiyama-USA, Inc. - www.kashiyama.com
- 41432 Christy Street, Fremont, CA 94538, USA

email, Tel. +1 (510) 979-0070

Kashiyama-USA, Inc. is a U.S. subsidiary of KASHIYAMA Industries, Ltd. in Japan.

products: Dryvacuum pumps

Best renowned for its vertical screw pumping technology, with improved energy-saving structure, SDE series offers unrivaled reliability and productivity in harsh applications. Designed for on board installation, MU series offers powerful pumping performance from mini package requiring only 700 watts (MU100) at vacuum. SDL series offers high pumping speed from atmosphere, achieving high throughput for large load lock and FPD applications.

VACUUBRAND, INC. - www.vacuubrand.net
- 39939 Stevenson Common, Building G, Suite 3038, Fremont, CA 94538, USA

Cynthia Positano, Regional Sales Manager, email, Tel.

products: Oil Free Diaphagm Pumps

VACUUBRAND, INC. offers a comprehensive range of laboratory and instrument sized vacuum and gas transfer pumps, chemistry vacuum systems, and components for the 1000 to 10-4 mbar vacuum ranges.

Anatech USA - www.anatechusa.com
- 21363 Cabot Blvd., Hayward, CA 94545, USA

email, Tel. 800-390-4449

products: Thin Film Coating Equipment

Anatech delivers high value added thin film deposition services, and equipment that cleans at a molecular level, modifies surfaces, etches and deposits thin films.

MDC - www.mdc-vacuum.com
- 23842 Cabot Boulevard, Hayward, CA 94545-1661, USA

email, Toll Free +1 800-443-8817

MDC established its standing in the vacuum components industry after becoming one of the first licensed manufacturers of Varian's patented Conflat® metal-seal flange, known today to most MDC customers as the Del-Seal� CF metal-seal flange. Reputation for quality, continuous process improvement, innovation and reliability have made MDC a coveted provider of vacuum instruments and components the world over. MDC achieved ISO 9001 certification in 1999.

products:

High Vacuum Systems, high vacuum and ultrahigh vacuum components, from the most basic of elastomer gaskets to the latest in electron beam thin-film coating technology.

SEMICORE Equipment, Inc. - www.semicore.com
- 5027 Preston Avenue, Livermore, CA 94551, USA

email, Tel. +1 925-373-8201

Semicore Equipment, Inc. is a Silicon Valley based manufacturer and worldwide supplier of vacuum coating systems for the electronics, optical, solar energy, medical, automotive, military and related high technology industries. Our high-performance production or R&D vacuum sputtering and thin-film evaporation systems provide coatings on a variety of materials including plastic films, glass, ceramics, metals and hybrid substrates.

products: in-line Sputtering Systems & Batch Sputtering Equipment

Magnetron Sputtering
PVD Coating Systems
Thin Film Deposition
Thermal Evaporation
Sputtering Equipment
Vacuum Engineering

Vacuum pump Service - Sertec, Inc. - www.turbopumprepairservice.com
- 10828 Bancroft Ave. Oakland, CA 94603, USA

email, Tel. +1 (408) 607-4135

At Sertec, Inc. in California, we specialize in turbo pump repair and vacuum pump sales and service. Our shop carries a large stock of reasonably priced refurbished High Vacuum Pumps.

products: Service for High Vacuum Pumps

Vane and Piston Pumps, Dry Pumps, Scroll Pumps, Turbomolecular Pumps, Ion Pumps, Controllers, Booster Pumps, Diffusion, Cryo

Coker Pump & Equipment Co. - www.cokerpump.com
- 1055 Third St., Oakland, CA 94607, USA

email, Tel. +1 (510) 444-3731

products:

Distributor of vacuum pumps for hospitals, printing, electronic, vacuum filtration, vapor recovery & soil drainage.

Polycold Systems - www.polycold.com
- 3800 Lakeville Highway, Petaluma, CA 94954, USA

email, Tel. +1 (707) 769-7000

products:

- PFC Fast Cycle Water Vapor Cryopump: Using Polycold Systems� patented cryogenic refrigeration process, the PFC works on the principle of Meissner trapping. Water vapor is captured by condensation on a cryogenically cooled surface, called a Meissner coil. The Meissner (cryocoil) is mounted directly in the vacuum chamber so conductance is not limited by ports, manifolds, valves, and baffles.
- P Cryocooler: The Polycold P Cryocooler cryopumps water vapor and prevents back-streaming of vacuum-pump fluids. The Model P Cryocooler is also effective for cryosurfaces in load-lock systems where fast temperature cycling is not required.
PGC Gas Chiller, PGCL Closed Loop Gas Chiller, PCC Compact Cooler, CRYOTIGER®, AQUATRAP®.

SHIBAURA TECHNOLOGY INTERNATIONAL CORPORATION - www.shibatec.com
- 591 W. Hamilton Avenue Suite 210, Campbell, CA 95008, USA

email, Tel. (408) 626-7900

products:

FPD Manufacturing Equipment
Semiconductor Manufacturing Equipment
Media Device Manufacturing Equipment
Vacuum Equipment
Laser Equipment

PFEIFFER Vacuum Inc. - www.pfeiffer-vacuum.com
- 568 Gibraltar Drive, CA 95035 Milpitas, USA

Bob Feichtmeir, Key Account Manager,
Armando Cordova, Sales Engineer,

Celerity, Inc. - www.celerity.net
- 1463 Centre Pointe Drive, Milpitas, CA 95035, USA

email, Tel. +1 408 946 3100

products:

Capacitance Manometers
Celerity�s digital capacitance manometers provide absolute pressure measurements irrespective of gas composition, making them the preferred vacuum gauge for process measurement in both the semiconductor and electronics industries. We offer a comprehensive range of unheated, high-performance gauges, unheated compact gauges, and high-performance heated gauges for the most critical process measurement applications.
Chamber Pressure Control Systems

Technovac Service - http://technovacservice.com
- 16840 Joleen Way Suite H, Morgan Hill, CA 95037, USA

email, Tel. +1 408.391.3929

products:

Vacuum Pump Service - specializing in Edwards Dry Pump Repair
We are a full service provider of unbiased, straight-forward, cost effective vacuum pump repair. From our headquarters in Morgan Hill, California, we serve the entire United States and an emerging Asian market. We specialize in all vacuum pumps, including wet, dry, semiconductor, industrial, blowers, scrolls and turbos. We offer the experience and technical skills to provide knowledge based evaluations and practical service and vacuum pump repair solutions. Technovac�s Refurbished Sales Division offers affordable alternative equipment replacement for most circumstances when repair is not feasible.

Excel Tek Inc. -
- 1902 Lafayette St. #F, Santa Clara, CA 95050, USA

email, Tel.

Excel Tek was founded in March of 1990 in Santa Clara, CA (the heart of the silicon valley). We specialize in repairing and selling high quality vacuum equipments for high technology industries. We understand that reliability and performance of these equipments make a major difference in productivity. This is proven everyday to companies who, for years have depended on our technical staff for servicing, refurbishing, and rebuilding their vacuum pumps to peak performance.

products:

Excel Tek offers a wide range of refurbished product selections from major vacuum solution manufacturers.
They include:
Cryo Pumps - Genesis, CTI Cryogenics
Dry Pumps - BOC Edwards, Ebara
Piston Pumps - Leybold, Kinneys, Stokes
Root Pumps - Alcatel, BOC Edwards, Leybold, Stokes
Rotary Vane Pumps - Alcatel, BOC Edwards, Busch, Leybold, Sargent Welch
Turbomolecular Pumps - Alcatel, BOC Edwards(Seiko Seiki), Ebara, Leybold, Pfeiffer Balzers, Osaka, Varian
Scroll Pumps - Anest Iwata, BOC Edwards, Varian

FMG Enterprises Inc. - www.fmgvacpump.com
- 1125 Memorex Drive, Santa Clara, CA 95050, USA

email, Toll free 800.327.6177

Founded in 1985 FMG has become the premier pump remanufacturer. Consistently providing the semiconductor industry with the highest level of service and vacuum pump rebuilds and repairs. In 1985, FMG purchased the property that our present plant is on. This included 20,000sf of production space and 10,000sf of warehouse space. Since then this property has been customized for the rebuilding of large quantities of vacuum pumps. FMG has future plans to expand this to 35,000sf of production space and 20,000sf of warehouse space. Our number one priority has always been quality and to get the customer back on line as quickly as possible, no matter what it takes.

products:

Repairs: We repair and rebuild all types of equipment, We repair and rebuild all major brands.
We sell all types of equipment: Turbomolecular Pumps, Cryogenic Pumps, Vane Pumps, Dry Pumps, Scroll Pumps, Piston Pumps, Industrial Pumps, Diffusion Pumps, Blowers, Compressors
We sell all major brands: Alcatel, Busch, CTI/Helix, BOC Edwards, Ebara, Leybold, Stokes, Dresser, Kinney, Sargent Welch, Balzers / Pfeiffer, Kashiyama, Seiko-Seiki, Ulvac, Hitachi, Tuthill/Kinney, Toyota

KASHIYAMA USA, Inc. - www.kashiyama.co.jp
- 3350 Scott Boulevard #6101, Santa Clara, CA 95054, USA
Mailing Address : 1072 S. De Anza Boulevard, Suite A107-539, San Jose, CA 95129

email, Tel. +1 (408) 845-9400

Vacuum Pump Sales, Customer Support, Service.

products: Dry Vacuum Pumps

Vacuabond - www.vacuabond.com
- 3074 Kenneth St, Santa Clara, CA 95054, USA

email, Tel.

Vacuabond is specializes in designing custom UHV systems for R&D applications, Semiconductor, Media, FPD, Solar Panel, and Coating industries.

products:

CANON ANELVA Crystal Vacuum Gauges, He Leak Detectors (HLD), Residual Gas Analyzers (RGA), Cryo Pumps, Helium Cooling as the US Distributor
custom-designed UHV systems: High Pressure RHEED, Diode Laser Substrate Heating, Combinatorial Deposition and Laser MBE / PLD systems.

Valqua America, Inc. - www.valqua-america.com
- 4655 Old Ironsides Drive, Suite 380 Santa Clara, CA 95054, USA

email, Tel. 1-408-986-1425

products: Metal Welded Bellows

Provac Sales Company - http://provac.com
- 2535 7th Ave. Suite 4, Santa Cruz, CA 95062, USA

email, Tel. +1 (831) 462-8900

products:

Provac provides a full line of rebuilt vane, piston, turbo, cryo and blower pumps and systems.
Brands include Alcatel, Busch, CTI, Ebara, Edwards, Leybold, Pfeiffer, Seiko Seiki, Stokes and Welch.
Helium leak Detectors and Oil Filtration Systems are also offered.
All equipment comes with a full coverage warranty.

OSAKA VACUUM, LTD., California Office - www.osakavacuum.com
- 911 Bern Ct. #140, San Jose, CA 95112, USA

email, Tel. +1 (408) 441-7658

Osaka Vacuum has 3 factories equipped with some of the most state-of-the-art machinery in Japan, covering more than 10,000 sq. meters in floor space. Osaka Vacuum now employs over 300 people mainly in R&D and manufacturing of vacuum equipment.

products:

Osaka Vacuum offers five different series of turbomolecular pumps to fit all your needs, from semiconductor applications to research:
TG Series - Hybrid Turbo Compound Molecular Pumps
TS Series - Helical Grooved Vacuum Pumps
TH, TF Series - Conventional Turbomolecular Pumps
TG-M, TH-M Series - 5 Axis Magnetic Suspended Turbomolecular Pumps
XHV Series - EXTREME High Vacuum 10-12 Torr Turbomolecular Pumps

US, Inc. Headquarters - www.us-incorp.com
- 6280 San Ignacio Avenue, Suite E, San Jose, CA 95119, USA

email, Tel. (408) 363.6909

US Inc., was established in 1976 and located in the heart of Silicon Valley. This location provides cooperative design, test, and thin film application for product advancements, with well known universities and national laboratories.
Since the early 1980�s exclusive licenses from two prominent Silicon Valley laboratories have been granted to US Inc., permitting the manufacture and distribution of patented Planar Magnetron Sputter Sources. With over 6,000 sources delivered throughout the world, US Inc. has become known world wide as a leading supplier of sputter deposition sources.

products:

The MAK source, US Inc.'s successor to the highly regarded US GUN, is produced at the company's San Jose, California U.S.A. facility. Introduction of the MAK was in late 1995 and it's rapid sales growth caused the discontinuation of the US GUN at the beginning of 1999. Designed to present the smallest profile possible, with higher rates than any comparable sputter sources available, MAK users have developed much of today's thin film techniques.

AMERICA ONE SURPLUS - www.surplusvacuum.com
- 6535 Camden Ave., 95120 San Jose, USA

Joze OSMAK, email: sales@surplusvacuum.com, Tel. 408-607-4135

We Buy, sell, rebuild vacuum pumps, blowers & systems.

products: Refurbished Vacuum Pumps

We have large stock of new and reconditioned vacuum product and supplies and in most cases items are shipped the same day as ordered. Our wide acces to used vacuum equipment and rebuilding services provides an additional excellent resource for low-cost solutions.
Turbomolecular Pumps, Helium Leak Detectors, Dry Pumps, Cryo Pumps, Diffusion Pumps

ACI Alloys, Inc. - www.acialloys.com
- 1985 Las Plumas Avenue, San Jose, CA 95133, USA

email, Tel. (408) 259-7337

Since 1985, ACI Alloys, Inc. has manufactured sputtering targets, evaporation sources, and specialty materials and shapes for thin-film or related applications. Our customers include many of the world's principal academic and industrial research groups.

products: Sputtering targets, evaporation materials

and high-purity alloys for research and development

Lucas Technologies, Inc. (Vacuum Pumping Systems) - www.lucastech.net
- 631 Giguere Court, #A-5, San Jose, CA 95133, USA

email, Tel. +1 408 258-8885

products: Semiconductor Equipments, Vacuum Pump Repair Services & Sales

We provide support & service for:
Vacuum Pumping Systems - PM for system, troubleshooting & repair
Vacuum Pump Repair - Blower, Cryo pump, Cryo compressor, Mechanical pump, Turbo-molecular pump and Scroll pump
Semiconductor Equipment Sales - New and used vacuum equipment and spare parts

MeiVac Inc. & US Division of MeiVac - www.meivac.com
- 5830 Hellyer Avenue, San Jose, CA 95138, USA

email, Tel. +1 408 362-1000

MeiVac brings more than 30 years of experience in the design, manufacture and support of vacuum deposition systems and components used in high technology, process intensive production applications. Today, MeiVac is best known for its 2460 & 2480 family of alumina deposition tools that are used extensively in the manufacture of Thin Film Heads used in Hard Disk Drives.

products: Vacuum deposition systems and components

Vari-Q Throttle Valves: MeiVac manufactures a broad line of patented vacuum throttle valves

MAK Sputter sources

Substrate heaters: US a division of MeiVac, Inc. resistive substrate heaters are designed to withstand oxygen and other reactive gases at maximum temperature and high pressures.

Power Supplies: DC Power Supplies, RF Power Supplies

GNB Corporation - www.gnbvalves.com
- 3200 Dwight Rd. Ste. 100, Elk Grove, CA 95758, USA

Ken Harrison, P.E., President, email, Tel. +1 (916) 395-3003

GNB has a proven track record of manufacturing high quality, reliable vacuum products since 1968.

products:

Although we are known primarily as America's leading manufacturer of large vacuum valves,
we offer a diverse range of vacuum products and services, including:
Gate valves, Liquid nitrogen traps, Pendulum valves, Custom flanges and fittings, Angle valves, View ports, Vacuum chambers, Bellows, Multi-coolant baffles, Throttle plates, Repair and rebuild of valves from any manufacturer.

Vacuum Process Engineering, Inc. - www.vpei.com
- 110 Commerce Circle, Sacramento, CA. 95815, USA

email, Tel.

Since its inception in 1978, Vacuum Process Engineering, Inc. has been committed to providing quality-oriented services and products that meet the critical needs of a diverse high technology customer base.
In the production job shop, we fabricate high quality components for demanding customers. Precision assembly of critical components is routine. Services are geared to the manufacture of components or systems that require welding, precision brazing and/or heat treating, leak detection, and assembly.
The development laboratory handles specialized customer requirements such as prototype development, applied materials science expertise, failure analysis, thin film coatings, and outgassing analysis. VPE provides consulting and contract research in the areas of fabrication technology and materials science.

products:

EBARA Technologies, Inc. - www.ebaratech.com
- 51 Main Avenue, Sacramento, CA 95838, USA

email, Tel. (800) 535-5376

EBARA Technologies, Incorporated (ETI) founded in 1990, is an American subsidiary of the Precision Machinery Group of EBARA CORPORATION, a world-leading manufacturer of vacuum pumps and advanced technology products for clean environments.
The EBARA Components Division supplies a wide range of products , services and applications assistance to the Semiconductor, R&:D, University and Industrial and Chemical process industries. Our Semiconductor Equipment Division is the worldwide leading supplier of Chemical Mechanical Polishing systems (CMP) that are installed in Semiconductor Production and Pilot line facilities.

products: vacuum pumps and advanced technology products

Dry Mechanical Pumps in both lobe and screw designs for applications ranging from the harshest semiconductor processes to SEM and loadlock applications with our A, AA, and AAS Series products.
Turbo Molecular Pumps with a five axis active magnetic bearing system and tuning free half rack controllers.
Point of Use Abatement, Degas/Regas/Ozone
Heater Products,
Vacuum Hardware
Vacuum Valves
Foreline Traps Foreline Traps
Systems Products

BUSCH, Inc. - www.buschpump.com
- 2485 Notre Dame Boulevard, Suite 370B, Chico, CA 95928, USA

email, Tel. 1-800-USA-PUMP
Larry Sill, Regional Manager (N.CA,ID,MT,N.NV,OR,WA,WY,HI,AK), Tel. +1 530-893-3800

Since the foundation of BUSCH in 1963 in Germany, the company policy has always been customer oriented, supplying high quality and competitively priced products, as well as excellent technical support and service backup. BUSCH now has five manufacturing plants and a total of 33 BUSCH companies serving customers throughout the world. The BUSCH manufacturing facilities are certified to ISO 9001

products:
Vacuum Technology, Vacuum Pumps & Systems,
- Oil Recirculating rotary vane vacuum pumps (R5 series up to 1600 m³/h),
- screw vacuum pumps (COBRA up to 2700 m³/h),
- rotary piston vacuum pumps and compressors (Mink up to 500m³/h),
- Once-Through-Sealing rotary vane vacuum pumps(Huckepack bis 760 m3/h),
- dry vacuum pumps (Seco bis 250 m³/h),
- side channel blowers (Gazelle, Samos up to 1100 m³/h),
- liquid ring vacuum pump (Dolphin up to 435 ³/h),
- Scroll vacuum pumps (Fossa up to 30 m³/h),
- Roots blowers (Puma / Panda up to 8000m³/h, - Dingo/Cat/Panther up to 3120 m3/h),
- Turbomolecular vacuum pumps,
- Service and Repair
- accessories

TED PELLA, Inc. - www.tedpella.com
- P.O. Box 492477, Redding, CA 96049-2477, USA

Sales, Tel. 800-237-3526

products:

Vacuum Equipment: Edwards RV5 Rotary Vacuum Pump, Edwards RV8 Rotary Vacuum Pump, Inert Gas Purifier, Sputter Coaters, Carbon Coaters, Vacuum Evaporator
Vacuum Supplies: Apiezon® Greases, Bell Jar Guard, Bell Jar Stand, Braycote® Grease, Carbon and Graphite Rods (for carbon deposition), Crystal Substrates, Diffusion Pump Oil, Dow Corning Grease, Dual-Vacset (connect two coaters to one rotary pump), Metal Boats for Evaporation, Mica and Silicon Chip Specimen Supports, Molybdenum Boat Molybdenum Foil, Platinum Boat, Santovac® 5, Tantalum Boat, Tungsten Boats, Tungsten Filaments, Substrates, Crystal, Mica, Silicon, Ultragrade 19 Vacuum Desiccators and Desiccant, Vacuum Evaporation Supplies (Filaments, Foil, Wire Baskets), Vacuum Grease, Vacuum Hose and Fittings, Vacuum Pump Supplies, (to include diffusion pump oil, foreline traps and exhaust filters) Wire for Vacuum Evaporation Deposition, Wire Baskets.

Nor-Cal Products, Inc. - www.n-c.com
- 1967 So. Oregon, Yreka, CA 96097, USA

email, Tel. 800-824-4166

Nor-Cal was mainly an OEM manufacturer for companies like Varian, UTI, Applied Materials, Edwards High Vacuum and Perkin-Elmer until 1978 when we produced a thirty-page catalog of standard components. Our latest catalog has more than 200 pages of standard products including high vacuum and ultra high vacuum flanges, fittings, valves, foreline traps, feedthroughs, manipulators and heater jackets. OEM and custom products, such as vacuum chambers, still make up a large portion of our annual sales.
Our 85,000 square foot corporate headquarters and manufacturing facility are located in Yreka, California. Approximately 200 employees manufacture nearly all of our products there and manage a worldwide network of sales representatives and stocking distributors. In 1997 Nor-Cal Products established a 4,000 square foot research and development facility in San Diego, California. (see picture at left) The staff is currently developing downstream pressure control devices for semiconductor processes.

products:
Flanges and Fittings, Weld Fittings, Isolation Valves, Downstream Pressure Control, Foreline Traps Vacuum Chambers Custom Components, Viewports, Sample Transfer and Manipulation Devices Liquid and Electrical Feedthroughs Thin Film Coating Instrumentation Thermal Products

PFEIFFER Vacuum Inc. -
- 51686 S.E. 9th St., OR 97056 Scappoose, USA

Toll Free Number: (800) 248-8254
Adam Roth, Sales Engineer,

Hoffman Instrumentation Supply (HIS) - www.hisvacuum.com
- 6110 NW Croeni Road, Hillsboro, OR 97214, USA

Tel. 1.800.466.4906

Since its inception in 1979, HIS has developed into an internationally recognized manufacturer of high quality vacuum components and fittings. We are pleased to supply the microelectronics industries, mechanical contractors, universities, and original equipment manufacturers.

products:

CF Series, KF/ISO Series
Weld fittings & Tubing, Valves
Custom Products

OMLEY INDUSTRIES, INC. - www.omley.com
- 150 Corporate Way, Grants Pass, OR 97526, USA

David Omley, CEO, email, Toll Free 800-548-9509

Founded in 1962 by Herb Omley, Omley Industries is a leader today in custom prototype and OEM production vacuum brazing. Today the business continues as a family held corporation with David Omley as the CEO.
The focus of Omley Industries has always been, and continues to be, concentrated on helping customers with developmental engineering of new projects and following them through to production. Our technology is strictly vacuum brazing. Within this discipline, Omley has developed processes for brazing a wide range of ceramics as well as many of the difficult-to-join exotic metal alloys.

products: Vacuum and pressure feedthroughs

Vacuum and pressure tight Instrumentation feedthroughs
Optical insertion probes
Vacuum and pressure tight high current feedthroughs
Beryllium x-ray window assemblies
Vacuum and pressure tight line breaks and stand-offs
Brazed titanium assemblies
Vacuum and pressure tight sapphire window assemblies
Custom vacuum and pressure tubing assemblies
Ceramic and metallic structural brazing

Thermionics Vacuum Products - www.thermionics.com
- 231-B Otto Street, Port Townsend, WA 98368, USA

email, Tel. 800-962-2310

Since 1958 Thermionics has designed, developed, and manufactured ultra high vacuum (UHV) equipment for scientific and industrial applications. Our products are the result of careful research and development, rigorous testing, and continuing performance evaluation.

products:

High Vacuum Pumps,
Manipulators and Mechanical Feedthroughs, Electrical Feedthroughs,
e-Guns™, Vacuum Coating Systems,
Valves, Flanges and Fittings, PyraFlat™ and TriMetal™ Flanges, Vacuum Pressure Gauges, Helium Leak Detectors

Telemark - tfi-telemark.com
- 1801 SE Commerce Ave, Battle Ground, WA 98604 USA

Peter Finn, email, Tel. +1 360-723-5360

Telemark is a privately-owned California Corporation, which entered the evaporation components business in March, 1990. The product range has since expanded to include water vapor cryotraps, quartz crystal deposition controllers, optical instrumentation, and magnetic fluid feedthrus. More recently, Telemark has forged a partnership with Saintech Pty Limited to offer innovative Ion Beam Sources. Products are manufactured at two factories in Hayward and Novato, California, a wholly owned subsidiary in Shanghai, China, and the Saintech facility in Sydney, Australia.

products: evaporation components

Electron Beam Sources
E-Beam Power Supplies,
Water Vapor Cryotraps
SainTech Ion Beam Systems
Instrumentation
Magnetic Fluid Feedthroughs

BEACH Pump & Service, Inc. - www.beachpump.net
- 119 Balboa Loop, 98626 Kelso, USA

Lorne Beach, email,Tel. +1 (360) 577-8070

servicing, maintenance, and restoration of Nash Vacuum Pumps and Compressors

products:

Nash Vacuum Pump Rebuilds, Replacement pumps, all liquid ring pump rebuilds, SS cladding, New parts all interchangable with Nash.

SOMARAKIS - www.somarakis.com
- 11614 NE Highway 99, WA 98668 Vancouver, USA

email, Tel. +1 (360) 574 6722
contact: Matt Hildebrand, Tom Carson

products:

Single-stage Liquid Ring Vacuum Pumps, Somarakis SV,SVP,HV Series, from 150 to 25,000 CFM
Somarakis SV series vacuum pumps and compressors are directly interchangeable with the Nash CL series. The SVP series is directly interchangeable with the Nash 904 series and HV series interchangeable with the Nash K, L, and H series.
applications: Pulp and paper, Mining, Power, Petro-chemical, Medical, Food processing, Chemical

Rogers Machinery Company Inc. - www.rogers-machinery.com
- 14650 S.W. 72nd Avenue, Portland, Oregon 97224, USA

email, Tel. +1 503 639-0808

products:

Sales, Service and Parts
Vacuum Pumps & Blowers: All Star, Busch, Leybold, Quincy, Roots, Sterling/Sihi, Welch

Cascade Machinery & Electric, Inc. - www.cascade-machinery.com
- 4600 East Marginal Way South, Seattle, WA 98134, USA

email, Tel. Tel. +1 206-762-0500

Sales and Service of Pumps, Motors, and Compressors Since 1918

products: Sales and service of pumps

From pulp and paper mills to food processing plants and commercial fishing vessels, we stock the broadest line of pumps in the Northwest and Alaska. We specialize in more than 20 different manufacturers pump lines, ranging from small rotary gear to large centrifugals and turbines with the accessories to back them all up. Our completely packaged pump systems optimize performance efficiencies while incorporating specific customer requirements. Packaged systems designed, engineered and built by Cascade include drivers, piping and valves.
As a distributor for several quality air compressor and accessory manufacturers, we stock all the parts and accessories needed to keep the finest compressed air systems running for years. We specialize in installations, in-field repairs, troubleshooting, air surveys, equipment training, and maintenance programs. We service all brands.

Atlas Technologies - www.atlasuhv.com
- 305 Glen Cove Road, Port Townsend, WA 98368, USA

email, Tel. +1 (360) 385-3123

products:

Rugged Ultra High Vacuum (UHV) Sealing for Aluminum Chambers:
Atlas CF Flanges^TM open the door to the many valuable properties of aluminum UHV chambers by providing the rugged, industry standard ConFlat * (CF) stainless steel knife edge and face on an aluminum flange body. Atlas CF Flanges are easily welded to aluminum vacuum chambers.
Aluminum Atlas CF Flanges are suitable for vacuum levels of 1x10^-13 Torr and may comfortably heat cycle to 250 ° C bake-out temperatures. Atlas CF Flanges are the key technology for successfully applying Aluminum in your ultra high vacuum (UHV) application.
Aluminum Atlas CF Flanges are used in prominent high vacuum (HV), ultra high vacuum (UHV), and extreme high vacuum (EHV) applications world wide.
Aluminum Atlas CF Flanges are used by semiconductor fabrication OEMs where the superior heat conduction, chemical resistance, manufacturing ease and cost effectiveness aluminum vacuum systems translate directly to productivity, cost of ownership advantages.
Atlas also manufactures custom bimetallic Aluminum / stainless Atlas CF Flanges for ultra high vacuum (UHV) applications using the Atlas explosive bonding process.

products:

Thermionics manufactures a full line of sputter ion pumps.
Standard Diode Pumps (IP Series), Noble Diode Pumps (NP Series), Hydrogen Diode (HP Series), Triode Pumps (TP Series)
Titanium Sublimation Pumps, Ti Pumps and Foreline Traps, Optically Dense Type, Molecular Sieve Type

Site Map www.vacuum-guide.com